Machine&Module: NEJE 3 Max v2 & E40
Material&Tools:Canvas,White spray paint, black spray paint
The Idea You Can Get from this Post:
![](https://nejetool.com/wp-content/uploads/2024/01/1;1-2-1.jpg)
Tutorial Guide
1. Material pre-processing
Spray 1 coat of white paint on the canvas surface, and then 2 coats of black paint after drying.
2. Pre-focus
Place the canvas and measure the focal length between the plywood and the E80 module to be 25 mm.
3. Upload files
- Reverse image.You can invert images and adjust other parameters in ImagR.
- Connect the machine and open lightburn, upload the dxf file you downloaded to the lightburn application interface.
![](https://nejetool.com/wp-content/uploads/2024/01/Tiger-canvas-1024x988.png)
4. The settings in lightburn
Engraving: 8000mm/min, 100%power
![](https://nejetool.com/wp-content/uploads/2024/01/Tiger-canvas2.png)
5. Final result
![](https://nejetool.com/wp-content/uploads/2024/01/Tiger-canvas3.png)
- NEJE laser engraver ideas——Zodiac Tailsman
- NEJE laser engraver ideas——Teapot storage
- NEJE laser engraver ideas——Mario refrigerator magnet
- NEJE laser engraver ideas——Inside Out 2 Blind Box
- NEJE laser engraver ideas——Easter egg holder