NEJE laser engraver ideas—T-rex 3d Engraving

Share Link

Machine &ModuleNEJE Max 4 & E80

Material:10mm mdf

The Idea You Can Get from this Post:

1.Pre-focus

Place the plywood and measure the focal length between the plywood and the E80 module to be 25mm.

2.Upload Your File

Connect the machine and open lightburn, upload the dxf/lbrn2/png file you downloaded to the lightburn application interface.

3.The Settings in Lightburn

Engraving: 15000 mm/min, 80%power,1 passes, Grayscale,318dpi

4.Other instructions

If you want the three-dimensional effect to be more obvious, you can try using the basswood for engraving. Before you do that, you can use the ps to convert it to black and white. Then adjust black and white ratio. Or you can upload the picture on www.imag-r.com, the website will automatically convert it. Then choose the size according to your needs and set the dpi to 423 and press ‘Material’ and select marcin grayscale in GRAYSCALE. Finally adjust its brightness as needed.

The specific process can be viewed: https://nejetool.com/neje-laser-engraver/neje-eagle-3d-relief-engraving/


Share Link

16 thoughts on “NEJE laser engraver ideas—T-rex 3d Engraving”

  1. Excellent post. I was checking continuously this blog and I am impressed! Extremely helpful information specially the last part 🙂 I care for such information a lot. I was seeking this particular info for a long time. Thank you and best of luck.

  2. Right here is the perfect site for everyone who would like to find out about this topic. You understand a whole lot its almost tough to argue with you (not that I actually will need to…HaHa). You definitely put a fresh spin on a subject that’s been discussed for decades. Excellent stuff, just great.

  3. You are so awesome! I do not suppose I’ve read something like this before. So nice to discover another person with some unique thoughts on this topic. Really.. thank you for starting this up. This website is something that is required on the internet, someone with a bit of originality.

  4. I blog often and I really thank you for your information. This great article has really peaked my interest. I’m going to bookmark your site and keep checking for new information about once a week. I subscribed to your RSS feed too.

  5. I’m amazed, I have to admit. Seldom do I come across a blog that’s equally educative and engaging, and without a doubt, you’ve hit the nail on the head. The problem is something which not enough folks are speaking intelligently about. Now i’m very happy I came across this in my search for something concerning this.

  6. Aw, this was a really nice post. In idea I would like to put in writing like this additionally ? taking time and actual effort to make an excellent article? but what can I say? I procrastinate alot and not at all seem to get one thing done.

  7. Everything is very open with a really clear description of the challenges. It was really informative. Your site is useful. Thanks for sharing!

Leave a Comment

Your email address will not be published. Required fields are marked *

Translate »