Machine & Module: NEJE Max 4 & E80
Material & Tool: 3mm Plywood, acrylic marker,glue
The Idea You Can Get from this Post:
Tutorial Guides:
1.Pre-focus
Place the plywood and measure the focal length between the plywood and the E80 module to be 25mm.
2.Upload Your File
Connect the machine and open lightburn, upload the dxf file you downloaded to the lightburn application interface.
3.The Settings in Lightburn
Engraving: 13000 mm/min, 90%power, 1 pass
Cutting: 400mm/min, 100%power
