NEJE B30635 Laser Module Description & Details


Model:   NEJE Module 500-700mw (INPUT about 3.5W)

Laser Output Power: CW 500mw , pulse 700mw

Wavelength: 405nm

Beam Shape:0.02×0.02mm Focus Dot (Focusable)

Heatsink Material: Aircraft Aluminum + Brass Shell

Cooling Mode: 20mm copper core + Heat Sink Groove+ Thermal silicone grease + 10000 rpm cooling fan

Dimension: 60 * 30 * 30mm

Adapter Output Voltage: DC 12V 2A

Can Engrave: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum

Can Not Engrave: Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material

Technical Parameters:

Module Input: 3500MW

TTL&PWM Modulation: YES, Compatible with Both TTL & PWM Modulation

Input Voltage: DC12V

PWM/TTL Input: DC3.3V-12V 

Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)

NOTE:Temperature interface can be disconnected,NEJE provides text instructions for temperature acquisition on the wiki.

Drive Mode: External ACC

Safe temperature range: <70 ℃

Module weight: 115g ( The lighter the weight, the smaller the moving inertia, the better the performance )

Life Time:  20,000 hours

Package Included

  • 1 x 500MW Laser Engraving Module
  • 2 x Screw
  • 2 x ABS cushion post
  • 1 x L-shaped wrench
  • 1 x 4 Pin Cable(300mm Sports Cable) 
  • 1 x NEJE Interface adapter board

Relate post


Other support

Leave a Comment

Your email address will not be published. Required fields are marked *

Translate »