NEJE E30130 Laser Module Description & Details


NEJE E30130 is a cutting module specially designed for high-precision and stable cutting. It adopts single beam optical compression technology to make X and Y have stable square characteristics in each focal length. 0.06×0.06mm focus and 20mm (lens to focus) fixed focal length, built-in high-pressure air auxiliary interface , can directly connect 4mm high-pressure pure air pump, 300mm/s directly and cleanly cut 3mm plywood, easy to focus, can adjust the focus through fixed thickness, it is a better choice for users who use the cutting function a lot, and for users with higher XY direction symmetry and cutting accuracy. Printing a 3D nozzle protection lens for engraving is also a good choice, E30130 can also directly engrave stainless steel, stone, hardwood and other materials. Of course, the cutting process that requires extremely high symmetry is the biggest feature of E30130.


Module: NEJE E30130

Focus: 0.06×0.06mm

Focus method: fixed ( about 10mm from the bottom  )

Optical power: CW 5.5W+, Pulse 7.5W

Wavelength: 450nm

Weight: 204g

Module Size: 30x30x130 mm

Input: DC 12V 3A

Interface: 4pin PH2.0 

Compatible with: NEJE 3 Max, NEJE 3 Pro, NEJE 3 Plus, NEJE 2s Max, NEJE 2s Plus, etc…

Power Control: PWM Power Modulation

Fan: Double Ball High Life Fan

Drive: NEJE Smart Quiet Drive, Built-in static elimination technology. 

Surge Protection: Yes

Smart Feedback: Yes

Temperature Feedback: Yes

Temperature control: 45℃

air pump: 0.5-1.5mpa clean air

Air interface: 4mm pvc trachea

Replaceable lens design: Yes

Original registered brand: Yes

Warranty: 2 years

Package list:

  • 1 x NEJE E30130 laser module ( Built-in high pressure air nozzle )
  • 1 x Laser module height adjuster
  • 1 x 4 pin cable(30cm)
  • 1 x 2pin yellow and black signal line + 3pin input line
  • 1 x NEJE test / switch / interface adapter board
  • 1 x 2.5mm L-shaped wrench
  • 1 x 5mm L-shaped wrench
  • 1 x Tube (4mm x 2m)
  • 1 x connector ( M8 to M4 )

Relate post


Other support

Leave a Comment

Your email address will not be published. Required fields are marked *

Translate »